A FourFold covers most of modern energy needs: its electricity powers lights, refrigerators, and air cooling, while its heat can warm a home or drive boilers. In the developing world, the module is needed in village clinics where it can sterilize water and refrigerate vaccines.
The fabrication technology to make FourFold solar modules in small local factories can be licensed from Focused Sun. A town as small as 5,000 can support a solar factory. These aren’t short term jobs: most towns and small cities will take decades to solarize.
Costs of the module’s collector are similar to a same-sized conventional PV panel because sandwich fabrication is used for the module’s mirrors. Sandwich fabrication is the most efficient structure for resisting the wind, the highest force a solar panel must withstand.
Conventional PV solar panels capture 20% of the sun’s energy as electricity. In the FourFold module, four mirrors concentrate the sunlight into a narrow strip of overhead PV cells, capturing just as much electricity. More important, coolant pumped through the absorber captures an additional 55% of the sun’s energy as heat. Altogether, the FourFold collects 75% of the sun’s energy, 500 W of electricity and 1500 W of heat for 2000 W total.
The attached shed stores energy overnight: heat in an insulated tank and electricity in batteries. With low costs and high-efficiency solar capture, payback can be as low as 2 years.
Focused Sun founder Rene Francis (Hallsberg, Sweden) said, “This solar technology can outperform anything else you could find in the world. And the best part is it can be built locally.” Referring to Princeton University’s eight stabilization wedges needed to avoid global warming, he adds,
If PV solar is one Princeton wedge, then this technology is four wedges. That’s half the global warming problem.
It is innovation like this from inventors and entrepreneurs that will change our energy future and create good paying, fun jobs for millions of people around the world.Governments come and go but the people live on and solar power is forever.
Here is a video from the inventor showing an installation of this solar generator. The video below shows the simple installation of the module.
First, the energy storage shed is moved into place. The shed comes as a one-piece assembly having a hose and electrical connections to the collector.
Next, the collector’s frame is installed in front of the shed. The frame, absorber, and mirrors come in a second box. The frame is installed with the absorber held by tubes above the frame. Only common hand tools are needed for assembly.
The video starts with the frame assembled in front of the shed. Each mirror has a square socket in each end. Mirror assembly begins by sliding a motor post onto a mirror socket at the top of the frame. Each mirror, in turn, is slid onto its respective motor post until all mirrors are placed.Then the axle post on the mirror’s other end is attached to the bottom of the frame. Only two bolts hold each attach the axle post to the frame.
Dr. Shawn Buckley, Chairman of Focused Sun, puts 200lbs of pressure on a sandwich panel from his concentrated solar collector to demonstrate its capability to withstand winds up to 150mph.
Gordon's expertise in the area of industrial energy efficiency and alternative energy. He is an experienced electrical engineer with a Masters degree in Alternative Energy technology. He is the co-founder of several renewable energy media sites including Solar Thermal Magazine.